Normally $3,499.00
Sale Ends 10/24/20
- Brochure
- 18x18x36 Rear Rails Drawing
- 20x20x30 Rear Rails Drawing
- 22x18x30 Side Rails Drawing
- 22x24x30 Rear Rails Drawing
- 24x22x30 Rear Rails Drawing
- 24x24x36 Rear Rails Drawing
- 30x30x36 Side Rails Drawing
- 22x26x30 Pass Through Drawing
- 30x30x36 Pass Through Drawing
- 16x16x30 90 Degree Drawing
- Door Chart
- Install Manual
- Order Form
- Technical Drawing
- Electrical Drawing
The QuickServe-200 Residential Dumbwaiter can make daily tasks a breeze when it comes to transporting heavy or bulky items between floors. Whether you're moving laundry to the utility room, sending groceries to the kitchen, or lifting firewood to the living room, the QuickServe-200 pound weight capacity makes it more than capable for most household dumbwaiter applications. A shelf is included but can easily be removed to transport any taller items. Optional larger car size has a 300-pound weight capacity.
Driven by a chain drive machine that can be mounted at the top or bottom of the hoistway, the QuickServer-200 travels at up to 32 fpm along aluminum guide rails. Instant safeties prevent the car from falling in the event of a chain failure, while the mechanical limit switches provide over travel protection and slack chain detection. For added safety, interlocks come standard, preventing the doors from opening unless the car is present, and preventing the car from moving until the door is closed.
Call/send stations allow you to send and retrieve the dumbwaiter from any level and feature "car here" and "in-use" indicator lights.
Not sure if the QuickServe-200 will work for you? We offer custom car sizes and configurations, as well as a number of custom finishes and options.
To learn more about the QuickServe-200 Residential Dumbwaiter, give our dumbwaiter experts a call today.
Base package includes:
- car size of 20" x 20" or 24" x 24" with either 30" or 36" high nominal car size
- industrial grade PLC from our elevator division
- white laminate or unfinished birch/maple car standard
- chain drive machine, universal mount for top or bottom of rails
- aluminum car sling with broken chain safeties, roller guides, aluminum guide rails
- 200lb capacity (standard), 33 fpm travel speed. 300lb upgrade available
- Call/send stations with car here and in use lights
- Honeywell reli-align door interlocks
- up to 12' travel included in base price
Options Available
- Job Reference
Job Name / PO $0.00
- Car Configuration - As Viewed From Bottom Landing
Single Opening - Right $0.00
Single Opening - Left $0.00
Single Opening - Front $0.00
Straight Through $450.00
90 Degree Cars only in Wood Materials and in the 3 Standard Sizes $0.00
90 Degree - Right $1,015.00
90 Degree - Left $1,015.00
- Stops
2 Stops $0.00
3 Stops $555.00
4 Stops $1,080.00
- Car Material Selection
Laminate or Veneer $0.00
Stainless Steel (Skip down to "Stainless Steel Car Options") $0.00
- Car Material - Laminate or Veneer
White Laminate $0.00
Unfinished Maple $0.00
Unfinished Cherry $185.00
Unfinished Mahogany $185.00
Unfinished Oak $185.00
- Car Finish for Wood Species
Leave Wood Car Material Unfinished (Stain Ready) $0.00
Clear Coat Finish for Car $346.00
Standard Stain for Car - Natural 209 (Includes Clear Coat) $692.00
Standard Stain for Car - Sedona Red 222 (Includes Clear Coat) $692.00
Standard Stain for Car - Classic Gray 271 (Includes Clear Coat) $692.00
Custom Stain for Car (Includes Clear Coat) $846.00
Custom Stain for Car (enter exact MINWAX stain #) $0.00
8"x8" Samples Available (Standard Shipping Rates Apply) $0.00
- Car Width & Depth (Inside Clear) - Laminate, Veneer
All Dimensions are Clear $0.00
Capacity: 200 Lbs. for Car up to 24"W and 24"D - 300 Lbs. for Car Over 24"W and/or 24"D $0.00
20"W x 20"D - Standard $0.00
24"W x 24"D - Standard $0.00
30"W x 30"D - Standard - 300 Lb. Capacity $650.00
* Refer to the Technical Drawing Document to See Available Custom Options * $0.00
Custom - Smaller than 20"W x 20D (Enter Dimensions Below) - Additional Lead Time Required $0.00
Custom - Larger than 20"W x 20D (Enter Dimensions Below) - Additional Lead Time Required $125.00
Custom Oversize - Over 24"W and/or Over 24"D (Enter Dimensions Below) - 300 Lb. Capacity - Additional Lead Time Required $650.00
- Stainless Steel Car Size Options
No Stainless Steel Car (make Car Material Selection above) $0.00
304 Grade Stainless Steel, #4 Brushed Finish (Dimensions are Clear) $0.00
Additional Lead Time Required $0.00
Stainless Steel - 20"W x 20"D x 30"H - 200 Lb. Capacity $1,895.00
Stainless Steel - 24"W x 24"D x 30"H - 200 Lb. Capacity $2,019.00
Stainless Steel - 30"W x 30"D x 36"H - 300 Lb. Capacity $2,548.00
Custom Stainless Steel Cars can add up to 6 weeks to build time $0.00
Custom Stainless Steel Car - Up to 24" Wide or Deep (enter dimensions below) $4,080.00
Custom Stainless Steel Car - Over 24" Wide or Deep (enter dimensions below) $4,080.00
- Custom Car Width & Depth (Clear) - All Materials
* Refer to the Technical Drawing Document to See Available Custom Options * $0.00
Inside Clear Dimensions are in Whole Inches Only $0.00
Width (min. 14" - max. 30") $0.00
Depth (min. 14" for Rear Rail / min. 17" for Side Rail - max. 30") $0.00
- Car Height (Clear) - All Materials
30" High $0.00
36" High $0.00
- Call-Send Control Options
"Car Here" Indicators (Included) $0.00
Keylocks (per lock) $93.00
- Options
Automatic In-Car Light $340.00
Float Level Switch $400.00
Machine Room Access Door - Kill Switch $93.00
Gate Switch on Car Gate $340.00
No Door & No Track (Not Recommended - Only for Low Overhead Space Installs) $0.00
Second Shelf - Laminate or Veneer $93.00
Second Shelf - Stainless Steel $116.00
Straight Through and 90 Degree Cars with Multiple Openings on the Same Landing May Require Additional Locks and Call/Send $0.00
Additional Right Hand Locks Required (One Provided Per Landing) $269.00
Additional Left Hand Locks Required (One Provided Per Landing) $269.00
Additional Call / Send Required (One Provided Per Landing) $85.00
- Drive Machine Location
Mount at Bottom (Recommended) $0.00
Mount at Top $0.00
- Travel Measurements
Bottom Floor Sill Height (typical 36") $0.00
Min Sill Height at Lowest Landing is 18" for a 30" Cab Height & 22" for a 36" Cab Height $0.00
Total Travel Bottom Floor to Top Floor (up to 50') (distance in inches) $0.00
Top Floor Sill Height (typical 36") $0.00
Overhead requirements are 90" & 96" respectively for 30" & 36" cab heights based on a 36" sill height at top landing $0.00
For each inch above 36" Top Floor Sill Height, add an additional inch to the overhead requirement. $0.00
Elevation Notes $0.00
- Total Travel
Up to 12' $0.00
12' To 18' $185.00
19' To 29' $400.00
30' To 40' $555.00
41' To 51' $710.00
- Drawings
Drawing Revisions (2 are Standard) Call for Price for Additional $0.00
E-Mail for Approval Drawings (required to get drawings) $0.00
- Fees
Florida Tax for Dumbwaiters sold to FL Customers $350.00
Kentucky Permit Fee $87.50
Georgia Permit & Inspection Fees $250.00
- Forklift Delivery for Dumbwaiter
Is Forklift Delivery Required for Dumbwaiter $0.00
